A bench top jointer is a very useful thing to have for wood workers. It enables the craftsman to work with precision and the cut the wood just right. This article has all the necessary tips that you should be aware of when using a bench top jointer, and this will make you appreciate this tool even more because if all the benefits it has to offer making you achieve the results you want and need.

  1. Jointing downhill: You will have to follow the direction of the grain to prevent any kinds of tear outs. If you feed the stock with downhill running grain and make sure it is away from the knife’s rotation, you will be able to achieve the desired results. This means that you should not joint the end grain because it will result in the knife breaking because of lack of support.
  2. Make sure your joint is adjusted: A table that is not aligned properly won’t result in the cuts that you want. If its too high, you won’t get an even surface, and if its too low the cut will be too heavy towards the back. So you should ensure that the table is well adjusted so that it matches the length and height of the knives.
  3. Face first: Make sure you join in face first, so that it is exactly square to the face of the board. After that, with the new bench top jointer you will have a flatter surface that will facilitate you with your milling and ripping.
  4. Joining the edges perfectly: Make sure the boards are joined without any sort of gaps. To achieve this you should, select the face that has the flattest surface, and then use it to edge joint the board. You should look at the best benchtop jointers for this purpose. After that you will be running the other board with the best surface, against the fence. Use glue and then do it again if you want more width.

Safety tips

Just like all the woodworking power tools, a jointer can be dangerous if you are not cautious with it. So in order to prevent any accidents happening, you should be sure of the following safety tips.

  • Safety glasses and ear muffs are absolutely essential.
  • The knives should be extremely sharp.
  • Make sure the fence is tightly secured and adjustments locks are in place. You should also check these frequently, when the jointer is not operational.
  • Do not try to make adjustments when the joint is operational.
  • Don’t try to be smart by freely manipulating the cutting, always use the fence.
  • Try to avoid any cuts that may be too heavy, as this could lead to the cutter head being jammed. Be careful of the amounts you cut off on softwoods and hardwoods.
  • When you are adjusting the surface of the stock, make sure to have both hands on the piece and use pushblocks.